New Products for Dynamic Conveyor



Tuesday, July 24, 2007

Let Your DynaCon Conveyor Think for You

Dynamic Conveyor now offers Light Curtains that analyze product as it is introduced to the conveyor.  Data from the Light Curtain tells the conveyor to index, divert, align, separate or reject/accept the product without human intervention.  

 

Light Curtains can be used in a horizontal position (as shown) to create a large detection area or can be installed vertically to detect product height.  Light Curtains can be used on all new or existing DynaCon conveyors and can be specified in lengths (or heights) from 6 to 72 inches.
6 

4 

DynaCon HEPA Tunnels Keep
Your Parts Clean

A DynaCon® HEPA Tunnel includes an enclosure, surrounding a new or existing DynaCon Conveyor, and a HEPA filter (High Efficiency Particulate Air Filter). 

The HEPA tunnel will remove at least 99.97% of airborne particles 0.3 micrometers in diameter, which are the most difficult to filter.  Particles that are larger or smaller will be filtered at a higher efficiency.  The DynaCon HEPA Tunnel provides the solution for keeping your product clean during the conveying process.

Ionizers Tackle Your Static Electricity Problems

When static electricity becomes an issue, Ionizers can be specified for new or existing DynaCon conveyors.

  1. •         Mountable in a variety of locations on any new or existing DynaCon conveyor
  2. •         Lightweight & easy to install
  3. •         Variable fan speed control
  4. •         Effective range up to 10 feet
  5. •         Energy efficient 115V
 5
 
2

Redirect Your Product When Needed

Diverter Arms are a new accessory to the DynaCon conveyor line.  Diverter Arms allow perpendicular diverting of conveyed parts onto another conveyor.  The Diverter Arm is pneumatically powered and integrated into the side of the conveyor so there are no open conveyor sides.  Diverter Arm modules can be specified for all new or existing DynaCon conveyors.

 

DynaCon Success Story

Challenge:  A company that injection molds bottle caps for the beverage industry conveyed their bottle caps with an overhead air tube transfer system.  The continuous movement of thousands of bottle caps through this system was a safety hazard due to the level of noise it produced throughout their facility. 

Solution:  Dynamic Conveyor worked with this customer to design a DynaCon conveyor system that would replace their current system.  The light-weight DynaCon conveyor system was easy to install overhead and nearly eliminated all noise that was created from transporting the bottle caps via the air tube transfer system.
 1

3

Order DynaCon Replacement Parts 24/7

To better serve you, a list of common replacement parts and their pricing are now available on our website.  Also available, is our new Purchase Request Form, which can be accessed for easy parts ordering any time – day or night.
 

Our conveyors assume any position...again and again and again!
email: sales@DynamicConveyor.com                                                                                    5980 Grand Haven Road
voice: 800.640.6850                                                                                                                 Muskegon, MI 49441


• Packaging Machinery
» Accumulating / Collating Machines
› Accumulator - Conveyor
» Conveying Machines
› Belt Conveyor
› Lane Divider / Merge / Transfer / Infeed Conveyor/Mechanism
• Machinery Component
» Mechanical
› Conveyor Belting

Complete the form below to request solutions from Dynamic Conveyor Corporation:


* indicates required field.
Contact Information:




Your privacy is of the utmost importance. Information submitted here is not used for any other purpose than to provide you with product information. Read the full Privacy Policy.